- Laser Machine
- Laser Cutter
- Laser Engraver
- Fiber Laser Machine
- Fiber Laser Marking Machine
- Laser Parts
- Cnc Fiber Laser
- Pipe Laser Cutting Machine
- Mini Fiber Laser
- High Power Fiber Laser
- Tube Fiber Laser Cutting Machine
- Hot Sale New Fiber Laser Machine
- Fiber Laser Welding
- New Design Fiber Laser Machine
- Tube Laser Cutting
- Tube &Plate Fiber Laser Cutting Machine
- Sheet Metal Laser Cutting
- Beam Laser Cutting
- Fiber Laser Cutting Machine With Safety Cover
- Fiber Laser Cutter With Safety Cover
- Metal Sheet Laser Machine
- Metal Sheet Laser Cutter
- Large Fiber Laser Cutting Machine
- For Tube Cutting
- For Metal Tube And H Beam
- For Metal Sheet
- For Tube&Sheet With Safety Cover
- Laser Tube Cutting Machines
- Laser Tube Cutting
- Aerospace Laser Cutting
- CNC Laser Cutting
- High Precision Laser Cutting
- Medical Device Laser Cutting
- Laser Cutting Machines
- Fiber Laser Cutting Metal Sheet
- CNC Fibre Laser
- Fiber Laser Plate Cutting
- Sheet Metal Laser Cutting Machine
- Fiber Laser Tube Cutting
- Metal Fibre Laser Cutter
- 3015 Series Fibre Laser Cutting Machine
- 3015L Series Fibre Laser Machine
- CNC Laser Machine
- Metal Fibre Laser Cutters
- Fibre Laser Metal Cutting Machines
- Sheet Metal Laser Cutting Machine
- Contact Person: Ms. Sophia Liu
- View Contact Details
Model No.: W4
Standard Component: Standard Component
Kind: Laser Power Supply
Brand Model: W4 Laser Tube
Country Of Origin: Beijing China
Quality Standard: 100w-130w
Packaging: wooden package
Place of Origin: Beijing China
Supply Ability: 1000/month
Certificate: CE, ISO, SGS
HS Code: 8456110090
Port: Qingdao Port
Payment Type: T/T,Western Union
Delivery Time: 5 Days
W4 Operation Instruction
CO2 laser tube is main Laser Parts for Laser Machine which are included CO2 Laser Cutting machine, CO2 laser engraving machine, Laser Cutter, Laser Engraver which can cut wood ,acrylic and so on
1. Installation Requirement
CO2 laser tube is main part for laser machine which are included CO2 laser engraving machine, CO2 laser engraving machine, laser cutter, laser engraver
Make sure to follow the operation instruction of model W4 as shown in the illustration. The dedicated power P14 should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 24kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage.
2. Operation conditions
Water cooling: using purified water; 3 to 5 liter/minute; water temperature: 10℃-40℃.
The operating environment: temperature 2-40℃; humidity 10-60%.
The working current: test current is 30mA. Maximum working current is 30mA. The running current must be kept below 28mA. The life span can reach 10,000 hours if the current is kept below 26mA. The ammeter must be connected to the negative electrode of laser tube.
When it is working under over-high current for long term, the negative pole will appearbrown yellow, and the life span will be shortened rapidly.
To protect dust from going into the insulation sheath, please wrap it with plastic film.
3. Working Performance
Engraving function: Very good. When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.
4. Key Notes
Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror:
1) When the mirror is polluted, do not turn on the laser.
2) Blow the mirror surface sideways with an air blower.
3) Spray the pure alcohol on the mirror surface with sprayer.
4) Turn on the laser after the alcohol gets fully volatilized.
5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted.
Attention: it is forbidden to clean the mirror with acetone.
The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the out power will be declined, even the tube will be scrapped.
Put the acryl 300mm far away from output mirror, when testing its laser spot.
The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks.
6. Storage and Transportation Requirement
Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40℃, and the requested humidity is 10-60%. Pack the laser as in the original way.
Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
Tubes operated in wrong way are not guaranteed by Manufacturer.Looking for ideal Co2 Laser Tube Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Laser Co2 Cutter are quality guaranteed. We are China Origin Factory of High Power Laser. If you have any question, please feel free to contact us.