Home> Industry Information> Analysis of current instability of fiber laser marking machine

Analysis of current instability of fiber laser marking machine

May 11, 2021

The reason why the current of the fiber Laser Marking machine is unstable: the main reason is that the type selection is wrong, the main board, the wiring board, or the control line connection and the cooling water circulation system are faulty.
Remedy: In the parameter setting, see if the laser type is correct, it is the main cause of continuous illumination failure.
Remove the control line (nine core wire) from the power supply and press the button to analyze whether it is a power supply or a motherboard failure.
Pull the nine core control line to see if there is any control line loose. The connection is not reliable.
The shot is normal, indicating that the power supply is fault free.
The shot is not normal, indicating that there is a problem with the power supply.
Check if the water circulation is normal, if there is no water flow sometimes, and if there is any problem with the water protector.

The above is the Analysis of current instability of fiber laser marking machine we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:How to operate a fiber laser cutting machine safely and efficiently?

Next:Relationship between Cutting Speed and Cutting Effect of Fiber Laser Cutting Machine